Product Bulletin - Controlled Atmosphere Brazing Furnaces
Furnace Designs
|
|
|
Active Only CAB Furnace System |
The controlled atmosphere brazing process uses a non-corrosive flux to reduce the tenacious aluminum oxide over layer that forms on the heat exchanger aluminum surface. SECO/WARWICK CAB furnaces provide the pure nitrogen atmosphere and temperature profile necessary to promote the formation of braze fillets between the fin and tubes and the tube to header joints of aluminum heat exchangers. SECO/WARWICK is now the exclusive manufacturer of both Camlaw and SECO/WARWICK brand CAB Brazing Systems. The following furnace designs are available to produce a variety of products in large or small volume production runs:
- Radiation Braze Furnaces
- Convection Preheat / Radiation Braze Furnaces
- Convection Braze Furnaces
- Active Only® Semi-Continuous Braze Furnaces (indexing)
- Batch Braze Furnaces
These furnace designs are described in detail in their associated pages. Whether you need a small quantity of prototype cores, or your business demands high volume production of various sizes and types of aluminum heat exchangers, SECO/WARWICK will custom engineer your CAB Furnace system.
Next: Radiation Furnaces
P. O. Box 908 180 Mercer Street Meadville, PA 16335-6908 USA
Phone (814)332-8400 - Fax (814)724-1407
info@secowarwick.com
©1995-2009 SECO/WARWICK Corporation All Rights Reserved.
The latest design, materials and equipment specifications should be obtained from the company before any reliance is placed on the enclosed since changes may occur due to product improvement.
| Return to Home | CAB Brazing |